Every App, Every Device
The Audioengine HD3 Wireless premium powered speakers are a mini home music system with high-fidelity stereo sound for smaller spaces and desktops. Wired or wireless connections, including USB audio from your computer, extended-range wireless aptX-HD Bluetooth from your phone, or good old analog from that vintage turntable or 80’s Sony tape deck. These are Audioengine's most-versatile wireless Bluetooth speakers, working with all your apps, music and devices so no matter how you listen, HD3 has you covered. And with no network setup, passwords to enter, or buttons to push, setting up these speakers is so easy you’ll be rocking in no time. Keep your music fun, easy and sounding great.
Small Speakers, Big Sound
Don’t let their size fool you, as this little speaker is packed with much more sound than you would expect. The HD3 Wireless Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, aptX HD Bluetooth and built-in power amps wrapped in precision-tuned, hand-crafted cabinets. Clear, full and powerful audio that fills almost any room.
Key Features
Small speakers with a big sound that fills any room |
High-end sound wrapped in hand-built wood cabinets |
Front panel volume control and headphone jack |
Extended-range wireless aptX-HD Bluetooth |
Simple setup, no receiver needed |
No buttons to push and inputs are always ready to go |
No network setup, no passwords, no hassle |
Technical Specifications
Type |
Powered Bluetooth aptX HD speaker system |
Amplifier Type |
Class AB |
Power Output |
60 W peak power total (15 W RMS / 30 W peak per channel), AES |
Drivers |
2.75" aramid fibre woofers 0.75" silk dome tweeters |
Inputs |
3.5 mm stereo mini-jack, RCA L/R, USB, Bluetooth |
Outputs |
RCA variable line-out, 3.5 mm mini-jack headphone out |
Input Voltages |
110-240 V, 50/60 Hz auto-switching |
SNR |
>95 dB (typical A-weighted) |
THD+N |
<0.05% at all power settings |
Crosstalk |
<50 dB |
Frequency Response |
65 Hz-22 kHz ±2.0 dB |
Input Impedance | 5K ohms unbalanced |
Protection | Output current limiting, thermal over-temperature, power on/off transient protection |
Power Consumption | Idle: 10W |
Bluetooth Specifications | |
Internal D/A Converter | PCM 5102 |
Input Bit Depth | 24 bit (padded) |
Bluetooth Receiver Type | Bluetooth 5.0 |
Supported Codecs | aptX-HD, aptX, AAC, SBC |
Wireless Operation Range | Up to 100 ft (30 m) typical |
Input Data Range | Determined by Bluetooth |
Wireless Latency | ~30 milliseconds (ms) |
USB Specifications | |
Connector Type | Micro-USB |
USB Device Class | type 1.1 and above |
Input Bit Depth | 24 bit (padded) |
Input Sample Rate | 44.1 kHz / 48 kHz |
Headphone Amp Specs | |
Headphone Amp Type | OPA2134 |
Full-Scale Headphone Output Level | 2.0 V RMS |
Output Impedence | 2 ohms |
Recommended Headphone Impedence Level | 10 ohms to 10K ohms |
In The Box | 2 x HD3 Wireless Speakers, Antenna, Speaker wire (16AWG) 2m, USB cable 1.5m, Power supply with detachable AC cord, Mini-jack audio cable 1.5m, Micro fibre speaker and cable bags, Set up guide |
Weight |
Left (active) – 4 lb (1.8kg) Right (passive) – 3.4 lb (1.5 kg) |
Dimensions (HWD) |
7″ (17.8 cm) x 4.25″ (10.8 cm) x 5.5″ (14 cm) |
Finish | Satin Black |
Warranty | 3 Years |
Why Burton Blake?
Since 2012, Burton Blake is the benchmark for timeless brands that add a unique touch of luxury to your life. Every week we add new products to indulge your fancy.